Tulsi Hydro Services

• As per ISO Standard
• Tierod construction as well as welded construction.
• Min. Bore o 25 mm to Max. bore o 571 mm.
• Working pressure. A 0) 140 kg/ cm², b ) 350 kg/ cm²
• Stroke length upto 6.5 metres.
• Telescopic cylinders as per customers requirements.
• Cylinders available In SS for Pharmaceutical Machinery.
  
  Features :
  
  1. Tube : Seamless honed tube of St. 52 matl. ASTM 106 B
  2. Piston Seals are of international quality having very low con- efficient of friction.
  3. Rod seal is of Polyurethane & guided nb PTFE bearings to take more side load of silf lubrication quality.
  4. Piston rods are of ally Strr; toughened & ground hard – chome plated. Re – grinding is done after chrome plating to ensure proper finish & maximum life bearing & Seal.
  5. All Cylinders are treated for static pressure testing & leakage.

TIEROD CONSTRUCTION CYLINDER

Bore :	32mm to 571 mm
Stroke :	5 mm to 4000 mm
WP PR :	10 to 315 bar
Mounting :	All Std. ISO 6020 or as per customer design

• Trunion Mounting

• Rear Clevis Mounting

• Front Flange Mounting

• Rear Fange Mounting


Welded Construction Cylinder

Bore :	32mm to 571 mm
Stroke :	5 mm to 4000 mm
WP PR :	10 to 315 bar
Mounting :	All Std. ISO 6020 or as per customer design

• Trunion Mounting

• Rear Clevis Mounting

• Front Flange Mounting

• Rear Flange Mounting

"TULSI HYDRO SERVICES" make hydraulic Power Pack Units consists of a Oil tank, whose base frame carries a vertical flange mounted Electrical Motor couple through a Gear Cum nylon coupling to Vane pump, Gear pump or a piston pump depending on pressure and capacity required The suction of the pump is fitted with a suction strainer capable of straining particles of 25 Microns size while the discharge side of pump is connecting piping. There by achieving compaction, reduce noise level, easy accessibility for maintenance or all the valves can be removed from the block for maintenance just by removing the bolts. Far showing Oil Level in the tank Oil Level indicator with Temperature control gauge is fitted in front of the tank at Top Side. The drainage System is given side of the Tank at the bottom. For filling Oil in the tank Air Breather is provided near the return line filter, return line filter is fitted behind the manifold block to purify the use Oil. SINGLE OR DOUBLE PUMP TYPE

Power :	0.25 HP to 35 HP
Flow :	0.8 LPM to 300 LPM
Type :	Manual or Electrical
WR PR :	upto 350 kg / m2 in Electrical upto 700 kg/ m2 in Manual

The critical High Pressure pump, Valves, and other Hydraulic Components will be one of the famous VICKERS YUKEN REXROTH and POLYHYDRON from india as well as BOSCH, HYDRO CONTROL, KOMPASS, ATOS, World wide Compaiies and Electrical Motor components will be one of the repute make such as SIEMENS CROMPTON Only.

Cap :	10 to 1500 tons
Type :	Single Double

Wire rope splincing machine / auto hydraulic / Fully Hydraulic

Table Size : 1000 * 750 mm to 1000 mm + 1500mm.

Application : Binding. Blankinge, Compaction, Splicing, Embosing, Moulding, Dishing, Straighting & Punching etc.