Home | Plastic Industry | Suppliers By Categories | Suppliers By Products | Suppliers By Materials



Home » Polycarbonate Products

Polycarbonate Products


» Polycarbonate Bags

» Polycarbonate Enclosures

» Polycarbonate Polymers


» Polycarbonate Resins

» Polycarbonate Rods

» Polycarbonate Sheets

» Polycarbonate Tubes


Weldmaxx Inc.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 26-26-32, Harbour Approach Road, Sea Horse Junction, Visakhapatnam , Visakhapatnam - 530001 , India
Phone: 91-33-9652834552
Website:
View Catalog
Hem Air System
Manufacturer and supplier of speciality chemicals which includes petrochemical & petroleum products, paraffin, perfumed petroleum jelly, coolant additives, petroleum ethers, liquefied natural gas, petroleum gas, lubricant, polyethylene wax, mazut.
Address: 11, 12 Sumatinath Complex, Opposite Kothawal Flats, Pritam Nagar - Paldi Ahmedabad, Gujarat , Ahmedabad - 380 007 , India
Phone: (91)-(79)-26577375
Website:
View Catalog
Vintek Chemicals
Exporting and manufacturing resin that includes bonding resins, polyamide resins, polyethylene resins, polypropylene resins, polystyrene resins, polyurethane resins, phenolic resins, phenol aldehyde unmodified resin, phenolic foam resins, flame retardant phenol formaldehyde resins, straight phenolic resin and phenolic resins etc.
Address: Anandvan, F-51/02, Plot No-6, Phase- Iii, Sector-4, Nerul. Navi Mumbai , Mumbai - , India
Phone: +(91)-(22)-65210713
Fax: +(91)-(22)-27710951
Website:
View Catalog
Gourav Cables Pvt. Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: B-336, Rajendra Nagar , Bareilly - , India
Phone: + 91 - 581 - 3291383
Fax: + 91 - 581 - 2480082
View Catalog
Haozhi Trading Co., Ltd., Shanghai, China
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Minhang Shanghai , Shanghai - , China
Phone: 86-512-57762257
Website:
View Catalog
Singh Polymer Industries
Manufacturer and supplier of plastic raw materials such as abs plastic granules, additive masterbatches, black masterbatches, color masterbatches, engineering plastics, plastic masterbatches, plastic raw materials supplies, polymer compounds, pp granules, reprocess granules, uhmw polyethylene, white masterbatches.
Address: No. 120, Mechanic Nagar Indore, Madhya Pradesh , Indore - 452 001 , India
Phone: +(91)-9826381081/ 9424539398
Website:
View Catalog
Mep Singapore Private Limited
Engaged in manufacturing and exporting of resins chemicals such as polyarylate resins, polycarbonate resins, polyetheretherketone resins, polyetherimide resins, polyethylene terephthalate resins, polyphenylene sulfide resins, polysulfone resins, polyvinyl resins, pva resins.
Address: No. 25, Mittal Chamber, Nariman Point, Fort , Mumbai - 400 021 , India
Phone: (91)-(22)-30221675 +(91)-(22)-30221676
Website:
View Catalog
Chengdu Xin Chang Imporz & Export Co,.ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 1#, New World West, Tianfu Rd., Chengdu - 610000 , Chengdu - , China
Phone: 86-28-86133227
Fax: 86-28-86133579
Website:
View Catalog
Sino-midia (hk) Co.limited
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: RM 905, Workingberg, Commercial Bldg, 41-47 Marble Road HK , China - , China
Phone: 86-755-26831520,13924649075
Fax: 86-755-26471440
Website:
View Catalog
Chemiplast Industries
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 55-57, Industrial Area, Sector-1, Distt- Solan , Parwanoo - 173 220 , India
Phone: + 11 - 1792 - 232570/232863/232864
Fax: + 11 - 1792 - 232770/233821
View Catalog
Dutt & Co.
Engaged in manufacturing and exporting of resins chemicals such as polyarylate resins, polycarbonate resins, polyetheretherketone resins, polyetherimide resins, polyethylene terephthalate resins, polyphenylene sulfide resins, polysulfone resins, polyvinyl resins, pva resins.
Address: 11/A , B.T. Road Kolkata, West Bengal , Kolkata - , India
Phone: +(91)-(33)-25649068/ 25443160
Fax: +(91)-(33)-25649068
Website:
View Catalog
Usha Martin Industries
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 2A, Shakespeare Sarani , Delhi - 700071 , India
Phone: 91-33-2823924
Fax: 91-33-2829029
View Catalog
Blue Direction International, Inc.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Lot 7 Se Tibbetts St , Portland - 97266 , Uniited States
Phone: 01-503-9298018
Fax: --
Website:
View Catalog
Pg International
Engaged in manufacturing, exporting and supplying of abrasive bonding resin, aromatic resin, bonding resins, foundry resin, hot melt resin, insulating resin, polyamide resins, polyethylene resins, polypropylene resins, polystyrene resins, polysulfone resin, polyurethane resins.
Address: 18, PREM KUTIR, GR.FLR., BABUBHAI CHINAI RD., CHURCHGATE , Mumbai - , India
Phone: + 91 - 22 - Pg International
Fax: 91-22-22886137
Website:
View Catalog
Yangzhou Tech Economic & Trading Co., Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: No.306, Yunhe Hotel, #173 Wenchang Mid Road, Yangzhou - 225000 , Yangzhou - , China
Phone: 86-514-87220748
Fax: 86-514-87229748
Website:
View Catalog
Royal Works
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 22 Civiline , Roorkee , Roorkee - 247667 , India
Phone: 91-91-9917266861
View Catalog
Shah Electronics, Ahmedabad
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: A - 3, Manoharvilla, New Naroda, Nicol Road, Near Naroda Ca Nal, Nicol , Ahmedabad - 382 345 , India
Phone: +(91)-(79)-22820421
Fax: +(91)-(79)-22820423
Website:
View Catalog
St Engineering
Introducing sensitization resin as Rotogravure Printing Plate & Machines, it is suitable for printing, such packing materials as polyethylene, polypropylene bag, and cellophane and roll paper. It is a kind of ideal printing equipment for producing paper packing bags for food, supermarket handbags, vest bags and clothes bags.
Address: Plot No. 561, Phase - || Prabhat Saw Mill Compound, G.I.D.C. , Ahmedabad - 382 445 , India
Phone: + - - +91 98251 50154, +91 97122 01016
Website:
View Catalog
Safety Solutions
Suppliers, exporters and retailer of cloth fabrics, nylon webbings, jute webbings, organza tape, satin tape, webbings, draw cords, leather cords, polypropylene ropes, twines including high density polyethylene mono filament ropes, polypropylene mono filament ropes, cotton rope, twines fabrics, ropes fabrics.
Address: SHOP NO.- 133, 3RD FLOOR, SUMMI MARKET, 4787, PHATAK NAMAK, HAUZ QUAZI , Delhi - , India
Phone: 91-11-24522031
Website:
View Catalog
Daulat Ram Janak Raj
Wholesale supplier and producer of cotton rope, twines fabrics, ropes fabrics, organza tape, satin tape, webbings, draw cords, leather cords, polypropylene ropes, polypropylene mono filament ropes, cloth fabrics, nylon webbings, jute webbings, twines including high density polyethylene mono filament ropes.
Address: 118/A, MAIN BAZAR, NAJAFGARH , Delhi - , India
Phone: 91-11-25016263
Fax: 91-11-25016263
Website:
View Catalog
A Kismat Enterprises, Gurgaon
Exporting and manufacturing resin that includes bonding resins, polyamide resins, polyethylene resins, polypropylene resins, polystyrene resins, polyurethane resins, phenolic resins, phenol aldehyde unmodified resin, phenolic foam resins, flame retardant phenol formaldehyde resins, straight phenolic resin and phenolic resins etc.
Address: Opposite Hundai Showroom, Sohna Road, Islampur Gurgaon, , Gurgaon - , India
Phone: +(91)-(124)-3224869
Website:
View Catalog
Dalian Hemu International Trade Co.,ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: No.4-2-602, Blue Sky Garden, Huanshun Road, Donli District , Tianjin - , China
Phone: 86-22-24392514
Fax: 86-22-24976872
Website:
View Catalog
Go-go Overseas Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Rm.216, Tianjiu Business Building, No. 130 South Rd., Huancheng, Cixi - 315300 , Cixi - , China
Phone: 86-574-63816921
Fax: 86-574-63816924
Website:
View Catalog
HJN International
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 20/4, Tajmahal Road, Block-C , Mohammadpur - 1207 , Bangladesh
Phone: + 88 - 2 - 8141611
Fax: + 88 - 2 - 9568713
Website:
View Catalog
Shivam Electrical
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: C/o 10-b Balaji Park Tithal Cross Nanakwada , Valsad - , India
Phone: +91-02632-234921
Fax: +91-02632 234921
Website:
View Catalog
Polymer Threads Industries
Involved in exporting and supplying of leather cords, polypropylene ropes, twines including high density polyethylene mono filament ropes, polypropylene mono filament ropes, cotton rope, twines fabrics, ropes fabrics, cloth fabrics, nylon webbings, jute webbings, organza tape, satin tape, webbings, draw cords.
Address: PLOT NO. L-6022/4 PHASE:- IV, OPP. RAMJI PAPER MILL, G.I.D.C., VAPI - 396195 , Vapi - , India
Phone: 91-260-2450013
Website:
View Catalog
Orient Enterprises Chandigarh
Manufacturer and supplier of speciality chemicals which includes petrochemical & petroleum products, paraffin, perfumed petroleum jelly, coolant additives, petroleum ethers, liquefied natural gas, petroleum gas, lubricant, polyethylene wax, mazut.
Address: 501 OPP. STATE BANK OF PATIALA, RAILWAY STATION ROAD, VILLAGE DARIYA Chandigarh , Chandigarh - 160001 , India
Phone: (91)-(172)-2637832/ 5079339
Fax: (91)-(172)-5016339
Website:
View Catalog
Dongguan Quanlin Electronics Co., Ltd
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 3f,no.5,hetangang Industrial Park,beice,humen Town,dongguan City,guangdong Province,523925,china , Dongguan - , China
Phone: +86-769-38866371
Fax: +86-769-38866369
View Catalog
Ramchander Rajender Prasad
Manufacturers, exporters and suppliers of polypropylene mono filament ropes, cotton rope, organza tape, satin tape, webbings, draw cords, twines including high density polyethylene mono filament ropes, twines fabrics, ropes fabrics, cloth fabrics, nylon webbings, jute webbings, leather cords, polypropylene ropes.
Address: 77, COTTON STREET, BARABAZAR, KOLKATA - 700007 , Kolkata - , India
Phone: 91-33-22698526
Website:
View Catalog
Donghua Electric Stock Co. Limited
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: No. 3 Tengfei Road, Dongfeng Industrial Zone, Liushi, Wenzhou , Wenzhou - 325 604 , China
Phone: + 86 - 577 - 62788117/62774198/62774717
Fax: + 86 - 577 - 62788116/62788288
View Catalog
Hanhai International Group (china) Co., Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Sancun Industrial Zone, Wenzhou, Leqing , wenzhou - 325608 , China
Phone: 86-577-62318126
Fax: 86-577-62318126
View Catalog
D.s.enterprises
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: E-711, Dsidc, Narela Industrial Park, Narela , Delhi - , India
Phone: 91-11-0117781258
Fax: 91-11-0117781258
Website:
View Catalog
Techno Vision Industries
Dealers and retailers of polyethylene coated food lids, rigid containers, pharmaceutical foils, strip foils, flexible laminates, pouches, aluminium foil discs, food packaging containers, etc.
Address: No. 98/1, 4th Cross, Vivekananda Nagar, Begur Road, Bommanah alli , Bengaluru - , India
Phone: (91)-(80)-25733279
Website:
View Catalog
R.V.BROTHERS
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 1814, Pada Pole, Gandhi Road , Ahmedabad - , India
Phone: + - - (079 ) 22133702/ 30434826
Website:
View Catalog
Gemscab Industries Limited
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 4th Floor, Prem Sadan, 11 Rajendra Place , Delhi - 110 008 , India
Phone: 91-11-25815391
Fax: 91-11-25815376
Website:
View Catalog
Jain Vidyut
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: 6190, Nicholson Road , Ambala - 133001 , India
Phone: 91-0171-4000890
Website:
View Catalog
Shubham Techno Cables
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Gala No 2, Landmark Industrial Estate No 1, Blue Cheep, Sativali Road, Vasai , Thane - 401210 , India
Phone: 91-9890491569, 9820805883
Website:
View Catalog
Nezone Electronics Pvt Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Sp-531,c-2,phase-1 , Bhiwadi - 301019 , India
Phone: 91-361-2515229
Fax: --
Website:
View Catalog
Changzhou Tiansheng Plastic Co., Ltd.
Manufacturers of plastic woven, plastic bag, material polyethylene color any colors available( blue, green, orange, red, white, black, brown, olive green, silver, general cover, construction and equipment cover, etc.
Address: No.3 Linjiatang Xilin , Changzhou - 213 024 , China
Phone: + 86 - 519 - 3973993
Fax: + 86 - 519 - 3888395
Website:
View Catalog
Hebei Shunfa Wire Net Weaving Co. Ltd.
Model NO:Armoured Power Cable Voltage:Low and Medium Voltage Cable Insulation Material:XLPE Material Shape:Round Wire Certification:ISO CCC CE VDE SABS Brand:Lonheo Numbers of Cores: 1-5 Class of Conductor:Stranded or Solid Sheath:PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath
Address: Jingsi Industrial Zone, Huangcheng Town, Anping County , Hengshui - 053 600 , China
Phone: + 86 - 318 - 7755663
Fax: + 86 - 318 - 7755660
View Catalog


Recent Catalogs
Manufacturer and exporters of scaffolding fittings like cuplock system, kwik stage system, ring syst...

Sajaawat corner is one of the most influential manufacturing company in the window blinds, aluminium...

Producers and wholesale suppliers of printing inks, screen printing ink, pad printing ink, digital p...

Mahavir enterprises is an india based company engaged in the manufacture and supply of molded rubber...



1

Move to Vishwkarma Impex Pvt. Ltd., Delhi




Move to Consult Techniques (i) Pvt. Ltd.




 
 
Finished & Semi Finished          Products
Plastic Raw Materials &          Supplies
Resins & Compounds
Moulds and Dies
Spare Parts And Components
Plastic Scraps
Thermoplastic Materials
Thermoset Materials
more...
 
 
Plastic Construction Materials
Plastic Medical Products
Plastic Packaging Products
Plastic Pipe Fittings
Plastic Dies & Molds
Plastic Toys & Games
Plastics Mixers
PVC Pipe Plant
Moulds and Dies
Plastic Scraps
Thermoset Materials
Thermoplastic Materials
Plastic Furniture
more...
 
 
HDPE Products
LDPE Products
Polycarbonate Products
Polyethylene Products
PTFE Products
PVC Products
Plastic Bags
Polyurethane Products
FRP Products
more...
 
Plastic HS Codes
Plastic SIC Codes
Plastic Technology
Associations
Acronyms
Periodicals
more...
 
 
 


 Still not able to find what you are looking for ?
 


Product Yellow Pages
Service Yellow Pages
Industry Verticals
eIndiaBusiness MembersCopyright © Plastic Industry Portal. All Rights Reserved
Site Designed & Promoted by Advent Infosoft Pvt. Ltd.