Trade2Gain
Welcome to leads.eindiabusiness.com | Register | Sign In |



 

 
Search leads.eindiabusiness.com :  
 



Trade Leads by Industries







Home :: Building Construction Material, Equipment and Sanitaryware : Pipes, Pipe Fittings and Flanges



Pipes, Pipe Fittings and Flanges

Posted on
01 Dec
Threeway Steel Co.,ltd
Data would tell you what is dropping price. SSAW steel pipe, with standard of API5L, material GR.B, Diameter 355.6mm, Thick 8.0mm, Length 12mm, Meters 600nad the TON 41.15, remark BEVEL is the price of 606 USD/TON for FOB China. This is the price of SSAW steel pipe in 10th, October. After half a month, the price with the same situation has cut down for 4 USD with 602USD/TON for FOB China. You would say that it is only 4 dollars and I dont care. You would still dont care if you need 100 tons, 1000 tons or 10000 tons? Ten days after, the price cuts down again with the 592 USD/TON for FOB China. And this time it is 10 dollars cheap than before and almost 15 dollars than the first time.
China
China
Free
Posted on
21 Nov
Dinsen Impex Corporation
Fittings for socket joints Collar T type and K type Double Socket Bend 90 (1/4) Double Socket Bend 45 (1/8) Double Socket Bend 22.5 (1/16) Double Socket Bend 11.25 (1/32) All socket tee All socket tee with 45Angle branch Double-socket tee with flanged branch Double socket taper All socket crossing
China
China
Free
Posted on
21 Nov
Dinsen Impex Corporation
Dinsen supplies a comprehensive range of EN877 SML drainage cast iron pipe and fittings from DN 40 up to DN 300. Apart from the simple EN877 cast iron fittings such as bends, branches and reductions. Dinsen also supplies special fittings such as single branch, short pipe with door. EN877 SML cast iron pipes are suitable for installation inside or outside buildings. When grey iron pipes was been installed outside the buildings, it will not get rust with the protection of the coating.
China
China
Free
Posted on
27 Jul
Dinsen Impex Corporation
1) Diameter: DN80 C DN1800, we also can offer DN125; 2) Standard: GB13295, ISO2531, EN545, EN598, ASTM C151; 3) Effective length: 5.5m -6.1m; 4) Inner cement: Ordinary portland cement, sulphate resistant cement, high-alumina cement; epoxy coating. 5) Outside coating: Zinc coating(130g/m2 or more) and bitumen paiting or epoxy paiting(70um or more); 6) Joint type: T joint 7) Gasket: SBR, NBR, EPDM; ISO4633 / EN681-1 8) Testing: factory inspection report, SGS inspection, BV inspection report or other third inspection party; 9) Class: K7, K8, K9, K10, K12, class 30, class 40 EN545 DI Pipe DI Flanged fittings DI Socket fittings
China
China
Free
Posted on
18 Jan
Dinsen Impex Corporation
Cast iron waste pipe systems for all applications as per EN877 SML Cast Iron Pipe systemSMU ԧߧߧ ҧ SML Dinsen supplies a comprehensive range of EN877 SML drainage cast iron pipe and fittings from DN 40 up to DN 300. Apart from the simple EN877 cast iron fittings such as bends, branches and reductions. Dinsen also supplies special fittings such as single branch, short pipe with door. EN877 SML cast iron pipes are suitable for installation inside or outside buildings. When grey iron pipes was been installed outside the buildings, it will not get rust with the protection of the coating. FBE Cast Iron Pipe systemTML ԧߧߧ ҧ FBE Dinsen also supplies a comprehensive range of FBE drainage pipe and fittings from DN 40 up to DN 300. FBE cast iron pipes are coated inside and outside with powder epoxy by fusion bonded. This new kind of coating`s thickness can reaching 200m. Apart from the simple cast iron fittings such as bends, branches and reductions, Dinsen also supplies special cast iron fittings such as double short bend, rectangle access pipe. Couplings Dinsen supplies couplings for all size of cast iron drainage pipe systems. When you choose our products it will bring you the following convenience: 1.Easy and fast installation with no specialists required 2.High strength stainless steel materialsSS316 for steel belts and screws 3.Better sealing and environment friendly materials for rubber rings
China
China
Free
Posted on
10 Dec
Dinsen Impex Corporation
1, SISTEMA DE HIERRO drainge TUBO / SML / MA / TML / KML FUNDIDO 2, NO tuberas de aguas HUB REPARTO DE HIERRO Y ACCESORIOS, tubos de hierro sin cubo de CAST Y ACCESORIOS 3, ACERO INOXIDABLE ACOPLAMIENTO, FUNDIDO ACOPLAMIENTO tubera de hierro, hay acoplamiento HUB 4, CLAM TUBO 5, Hierro Dctil Y ACCESORIOS 6, las tapas de alcantarilla y EN124 MARCO
China
China
Free
Posted on
29 Aug
Guangzhou Mayer Corp., Ltd
Press fitting system joins pipe without welding or bolting. The components fit by crimping through the use of a special pressing tool. An O-ring that is inserted in the fitting ends of the pipe ensures a leak-proof connection. Press fitting system is the trend of pipeline industry; It is widely used in cold and hot water supply, heating supply, fire protection, medicinal gas, industrial petroleum pipeline system etc. For the size, now we have three series: 1. Out diameters: 16.0, 20.0, 25.4, 32.0, 40.0, 50.8, 63.5, 76.1, 88.9, 108.0 (GB/T 19228.2-2011) 2. Out diameters: 15.88, 22.22, 28.58, 34.0, 42.7, 48.6, 76.1, 88.9, 101.6 (JIS G3448-1980) 3. Out diameters: 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108 (EN 10312:2002) Technical information: -- Material: Stainless steel 304 and 316L available. -- Max working pressure 1.6MPa (equal to 232 psi), testing water pressure: 2.5MPa (equal to 362.5psi). -- Working temperature from -20 to 110 degree centigrade (with Chlorinated butyl rubber O ring), -- Suit medium: Cold water, hot water, compressed air, gas, oil etc The product features as below: 1, thin wall stainless steel pipe could last for 70 years, it is the same life time with normal buildings. 2, no smell, no rusty. 3, recycle material 4, avoid welding, avoid fire dangerous. Contact us for more details!
China
China
Free
Posted on
29 Aug
Guangzhou Mayer Corp., Ltd
Press fitting system joins pipe without welding or bolting. The components fit by crimping through the use of a special pressing tool. An O-ring that is inserted in the fitting ends of the pipe ensures a leak-proof connection. Press fitting system is the trend of pipeline industry; It is widely used in cold and hot water supply, heating supply, fire protection, medicinal gas, industrial petroleum pipeline system etc. For the size, now we have three series: 1. Out diameters: 16.0, 20.0, 25.4, 32.0, 40.0, 50.8, 63.5, 76.1, 88.9, 108.0 (GB/T 19228.2-2011) 2. Out diameters: 15.88, 22.22, 28.58, 34.0, 42.7, 48.6, 76.1, 88.9, 101.6 (JIS G3448-1980) 3. Out diameters: 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108 (EN 10312:2002) Technical information: -- Material: Stainless steel 304 and 316L available. -- Max working pressure 1.6MPa (equal to 232 psi), testing water pressure: 2.5MPa (equal to 362.5psi). -- Working temperature from -20 to 110 degree centigrade (with Chlorinated butyl rubber O ring), -- Suit medium: Cold water, hot water, compressed air, gas, oil etc The product features as below: 1, thin wall stainless steel pipe could last for 70 years, it is the same life time with normal buildings. 2, no smell, no rusty. 3, recycle material 4, avoid welding, avoid fire dangerous. Contact us for more details!
China
China
Free
Posted on
29 Aug
Guangzhou Mayer Corp., Ltd
Press fitting system joins pipe without welding or bolting. The components fit by crimping through the use of a special pressing tool. An O-ring that is inserted in the fitting ends of the pipe ensures a leak-proof connection. Press fitting system is the trend of pipeline industry; It is widely used in cold and hot water supply, heating supply, fire protection, medicinal gas, industrial petroleum pipeline system etc. For the size, now we have three series: 1. Out diameters: 16.0, 20.0, 25.4, 32.0, 40.0, 50.8, 63.5, 76.1, 88.9, 108.0 (GB/T 19228.2-2011) 2. Out diameters: 15.88, 22.22, 28.58, 34.0, 42.7, 48.6, 76.1, 88.9, 101.6 (JIS G3448-1980) 3. Out diameters: 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108 (EN 10312:2002) Technical information: -- Material: Stainless steel 304 and 316L available. -- Max working pressure 1.6MPa (equal to 232 psi), testing water pressure: 2.5MPa (equal to 362.5psi). -- Working temperature from -20 to 110 degree centigrade (with Chlorinated butyl rubber O ring), -- Suit medium: Cold water, hot water, compressed air, gas, oil etc The product features as below: 1, thin wall stainless steel pipe could last for 70 years, it is the same life time with normal buildings. 2, no smell, no rusty. 3, recycle material 4, avoid welding, avoid fire dangerous. Contact us for more details!
China
China
Free
Posted on
29 Aug
Guangzhou Mayer Corp., Ltd
Press fitting system joins pipe without welding or bolting. The components fit by crimping through the use of a special pressing tool. An O-ring that is inserted in the fitting ends of the pipe ensures a leak-proof connection. Press fitting system is the trend of pipeline industry; It is widely used in cold and hot water supply, heating supply, fire protection, medicinal gas, industrial petroleum pipeline system etc. For the size, now we have three series: 1. Out diameters: 16.0, 20.0, 25.4, 32.0, 40.0, 50.8, 63.5, 76.1, 88.9, 108.0 (GB/T 19228.2-2011) 2. Out diameters: 15.88, 22.22, 28.58, 34.0, 42.7, 48.6, 76.1, 88.9, 101.6 (JIS G3448-1980) 3. Out diameters: 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108 (EN 10312:2002) Technical information: -- Material: Stainless steel 304 and 316L available. -- Max working pressure 1.6MPa (equal to 232 psi), testing water pressure: 2.5MPa (equal to 362.5psi). -- Working temperature from -20 to 110 degree centigrade (with Chlorinated butyl rubber O ring), -- Suit medium: Cold water, hot water, compressed air, gas, oil etc The product features as below: 1, thin wall stainless steel pipe could last for 70 years, it is the same life time with normal buildings. 2, no smell, no rusty. 3, recycle material 4, avoid welding, avoid fire dangerous. Contact us for more details!
China
China
Free





 
 
Search Buying/Selling Leads on Trade Leads