Prolific Engineers |
Prolific engineers - testing equipment manufacturers, testing equipment exporters, testing equipment suppliers, testing equipment from india, compression testing equipment, hardness testing equipment, compression testing equipment supplier, hardness testing equipment suppliers
|
Address: D-91, Sector 2 , Noida - Uttar Pradesh , India |
Phone: +91-120-4334481-82-83/4264881/3053325/2558838 |
Fax:
+91-120-2522648 |
Stead Electronic Industries |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 17, UA Jawahar Nagar , Delhi - Delhi , India |
Phone: 23918727/23919325/23958169 |
Fax:
23942810 |
Jain Scientific Glass Works |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 14 Industrial Estate , Ambala - Haryana , India |
Phone: 2698184/2698185 |
Fax:
2698390 |
M. Tech Instruments |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: Rampur Road, Behind Uttranchal Gramin Bank , Roorkee - Uttar Pradesh , India |
Phone: 91-9758855780 |
Sai Scientific Solutions |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: # 3345/2, 2nd Floor, Ahata Meena Mal Ka, Near Pul Chameli, Ambala Cantt , Ambala - Haryana , India |
Phone: +91-82-22816171 |
Asli (china) Test Equipment Co.,ltd |
We are leading manufacturer and supplier of Temperature humidity salt spray test Chamber etc.
|
Address: Jinhui Industrial Park, Lixin Town,east City District 523000,dongguang City,china , Dong guan - Guangdong , China |
Phone: +86-769-23164266 |
Fax:
+86-769-22851784 |
Tarun Enterprises, Allahabad |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 8/8 Strachy Road, Civil Lines , Allahabad - Uttar Pradesh , India |
Phone: 622785 |
Fax:
420735 |
Shanghai Lin Pin Instrument |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: Shanghai , Shanghai - Shanghai , China |
Phone: +86-4000662888 |
Fax:
++8621-60899999 |
Shine Dew Water Equipment Co.,ltd |
We are manufacturing trader & exporter all kinds of machines Ro pure water machine, bottle filling machine, labeling machine, date printing machine, and packing machine.
|
Address: Room 209, Block D,yuetong Zonghe Building, Minle Road, Longhua Town, , Shenzhen - Guangdong , China |
Phone: 0086-755-23140799 |
Fax:
86-755-28180796 |
ISA Impex Private Limited |
Manufacturer and exporters of condensation testers, UV fluorescent testers, cyclic corrosion testers, xenon testers.
|
Address: 56, Defence Colony, 100 ft.Road, Indiranagar , Bangalore - Karnataka , India |
Phone: 25280747/25285512 |
Fax:
25280706 |
Para Electronics (i) Pvt. Ltd. |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 215, Regal I.E., A.Donde Marg, Sewri , Mumbai - Maharashtra , India |
Phone: 91-22-24134622 |
Fax:
91-22-24133341 |
Skyline Instruments Co.,ltd |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 311 C Building Fly South Square Xin Xi Bian Niu Shan Dongchen District , Dongguan - Guangdong , China |
Phone: +86-769-38818151 |
Fax:
+86-769-38818154 |
Enkay Enterprises |
Leading exporters of testing machines & testing equipments.
|
Address: 605, Padma Tower-2, 22 Rajindra Place , Delhi - Delhi , India |
Phone: 91-11-41539634 |
Fax:
91-11-41539633 |
Alpha Engineering Company |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: A-57, Dfidc Packaging Complex, Kirti Nagar, Indl Area , Delhi - Delhi , India |
Phone: 91-11-25927771 |
Fax:
91-11-41420149 |
JAIN SCIENTIFIC INDUSTRY |
Manufacturer of Laboratory equipment, physics lab, biology lab ,math lab ,chemistry lab ,science lab, laboratory testing equipment, Laboratory Glassware, Laboratory equipment suppliers, lab equipment manufacturers, general laboratory equipment manufacturers, laboratory equipment wholesale, laboratory equipment wholesalers, laboratory equipment, lab equipment, general laboratory equipment, science lab equipment, laboratory testing equipment, general laboratory equipment suppliers, general laboratory equipment exporter
|
Address: 1101/1,GYAN MARG,BEHIND S.D PUBLIC SCHOOL,AMBALA CANTT , Ambala Cantt - Harayana , India |
Phone: 91-99966-9996674444 |
Fax:
9996674444 |
Vinay Trading Company |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 3493, D. C. Road , Ambala - Haryana , India |
Phone: 5009821 |
Fax:
2644593 |
Export Import Consortium |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 38 Azad Nagar, Jagadhri Road , Ambala - Haryana , India |
Phone: 91-171-2699280 |
Fax:
91-171-2699280 |
V.S.Metal Works |
Manufacturers and suppliers of Automotive Bush, Thrust Washer and Bimetal Bearing. Also manufacture Bushes for valve rocker arm, Connecting rod, Oil pump, Fuel injection pump, Tractor king pin, CAM shaft etc.
|
Address: 23/1 Ellaimudali Lane, Swamiyar Thottam, Old Washermanpet, Chennai - 600 021, India , Chennai - Tamil Nadu , India |
Phone: 25956952 |
Fax:
25952845 |
Gloria Engineering Works Pvt. Ltd. |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 13-E, Everest House, 46-C, Chowringhee Road , Kolkata - , India |
Phone: 91-33-2886820/2886824 |
Fax:
91-33-2887186/2886284 |
Precision Instruments House |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 3517, Timber Market , Ambala - Haryana , India |
Phone: 2643217/2644517 |
Fax:
642743 |
S. K. SODA DISPENSER INTERNATIONAL |
Manufacturing and exporting of soda machine, soda fountain machine, soda vending machine, soda dispenser machine, soda making machine, soda automatic machine etc.
|
Address: Sardar Complex, Shop No. 20-21, Gundala Road, Nr. Railway Crossing, GONDAL , Gondal - Gujarat , India |
Phone: +91 - 2825 - 296486 |
Fax:
+91 - 2825 - 296486 |
Arya Group |
We provide water test, sand test, concrete blocks test, concrete mix test, steel test, cement test, pipelines test, tiles test, wires test, door test systems.
|
Address: #181, Intermediate Ring Road, Amarjyothi Layout, Domlur , Bangalore - Karnataka , India |
Phone: +9i1-80-25357547 |
Sinosun Crusher |
China crushing plant manufacturer and supplier. We offer \\crush machines including cone crusher
|
Address: Industrial Zone, Zhengshang Road , Zhengzhou - Henan , China |
Phone: +86-371-55637952 |
Fax:
+86-371-55637953 |
Narang Scientific Industries |
Manufacturers & Suppliers of dairy equipments for milk testing.
|
Address: 3545 Timber Market , Ambala - Haryana , India |
Phone: 91-171-2642754 |
Fax:
91-171--2640854 |
Testwell Instruments Co. |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 7-7, Old Doubl Storey, Lajpat Nagar Iv , Delhi - Delhi , India |
Phone: 91-11-26412407 |
Fax:
-- |
National Instruments Corporation, Roorkee |
We are leading manufacturer of survey and drawing instruments, aerial photograph and instruments, hydrological equipment, aggregate testing equipment, bitumen testing equipment, cement and concrete testing equipment, meterological products, soil and plant sciences equipment, soil testing equipment, material testing equipment, environmental equipment, life saving jackets, compressive strength testing equipment, drawing instruments.
|
Address: 12, Civil Lines , Roorkee - Uttar Pradesh , India |
Phone: +(91)-(1332)-271060 |
Shimadzu (asia Pacific) Pte Ltd. |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 208, Sethi Bhavan, 7, Rajendra Place , Delhi - Delhi , India |
Phone: 91-11-25773931 |
Fax:
91-11-25773968 |
Associated Scientific And Engineering Works |
Manufacturer and exporters of material testing instruments like cone pentrometer, plastic limit apparatus, shrinkage limit apparatus, high speed stirrer, sieve shaker, liquid limit device with tools.
|
Address: 6, Rani Jhansi Road, Motia Khan , Delhi - Delhi , India |
Phone: 23521188/23534863 |
Fax:
23534863/27193360 |
Worldclean Industrial Co. Limited |
Manufacturer and exporter of aluminium anodizing turn-key equipment, electrophoretic deposition turn-key equipment, industrial plating turn-key equipment, sandblast machine for aluminum workpiece, chemical solution for aluminium anodizing.
|
Address: 4F, No.1-21, Kuo-Jian Road, Chien-chen District, Kaohsiung , Chien-Chen - Kaohsiung , Taiwan |
Phone: 8152177 |
Fax:
8157663 |
Filtration Engineering & Consultants |
We are the manufacture of world class testing equipments.
|
Address: Plot No-35, K-1 Extn., Bank Wali Gali Gurudwara Road, Mohan Garden, Uttam Nager, New Delhi-59 , Delhi - Delhi , India |
Phone: 91-0-9811478874 |
M. Tech Instrument |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 272/4 Opp. Sapna Talkies , Roorkee - Uttar Pradesh , India |
Phone: 91-1332-265865 |
Fax:
9758855828 |
Budhsingh And Sons |
Deals in testing machine.
|
Address: C-3, Industrial Estate , Roorkee - Uttar Pradesh , India |
Phone: 91-1332-262522 |
Fax:
-- |
Supertek Engineers |
We are leading manufacturer, trader and supplier of cnc laser cutting, cnc bending, sheet metal components, fabrication machinery, material handling equipments, industrial gears, worm reduction gear box, machined components, precision shafts, special purpose machined, internal/external signages, road safety signages.
|
Address: C-257, Sector-10, District Gautam Budh Nagar , Noida - Uttar Pradesh , India |
Phone: +(91)-(120)-2535610 |
Fax:
+(91)-(120)-2535610 |
Instrulab |
Instrulab Suppliers & Wholesalers of instruments & instrument break down spares, testing instrumentation, measuring instruments, process control instruments.
|
Address: 67, G.S.T. Road, Sanatorium P.O , Chennai - Tamil Nadu , India |
Phone: 91-44-2364883/2364366 |
Fax:
91-44-2369034/2368024 |
Vishwakarma Scales Pvt. Ltd, Roorkee |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: R.O.- 141, Sukhdeo Nagar , Roorkee - Uttar Pradesh , India |
Phone: 91-1332-263209/262709 |
Fax:
91-1332-260259 |
Digital Promoters (india) Ltd. |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 505, Vishal Bhawan, 95, Nehru Place , Delhi - Delhi , India |
Phone: 91-11-41618100 |
Fax:
91-11-26437849 |
Shanghai Tiancheng Industrial Co.,Ltd |
„« Function introduction¡G
„« This machine is used to test and analyze the threaded fasteners.
Standard Reference¡G
ISO16047, ISO2320, BS EN14399, GB/T3098, GB/T16823, VW01131, GMW3359, C10054
Test parameters:
axial force(clamping force),the total torque, screw torque, torque of support surface, the total friction coefficient, supporting surface friction coefficient, thread friction coefficient test, K factor, yield limit torque, damage torque axial force and tight angle.
Components¡G
Whether a portable test system or a full laboratory system, they are typically comprised of the following five components: data acquisition, rotary torque transducer, clamp force load cell, drive system, and a fixture assembly.
|
Address: No.299 Xiangche Road, Chedun Town, Songjiang District, Shanghai , Shanghai - Shanghai , United States |
Phone: 86-21-68365595 |
Fax:
86-21-50521991 |
Kalindi Agro Biotech Ltd. |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 6th Floor, Bhandari House, 91, Nehru Place , Delhi - Delhi , India |
Phone: 91-11-6468706 |
Fax:
91-11-6464817 |
Seleniumtesting - Selenium Automation Testing Services |
We are Selenium Software and Automation Testing company in India. If you are looking for Mobile, Web or Performance Testing Tool services, then reach us.
|
Address: 317,tower B4,spaze Itechpark, Sector-49,sohna Road, Gurgaon 122018,india , Gurgaon - Haryana , India |
Phone: 91-124-4377337 |
Laminar Flow Systems |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 8-234/1, Gautam Nagar, Old Airport Road, Bowenpally , Hyderabad - Andhra Pradesh , India |
Phone: 91-40-7952797 |
Fax:
91-40-7952799 |
Envorn Scientific |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: F- 133 D Sector-8 , Noida - Uttar Pradesh , India |
Phone: 2506470/2424857 |
Leading Instruments Co., Ltd. |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: Huashan Town , Jinan - Shandong , China |
Phone: +86-531-58668976 |
Fax:
+86-531-67884556 |
Sadana Brothers |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 13/21, East Patel Nagar , Delhi - Delhi , India |
Phone: 5820068/5825010 |
Fax:
5762991/5707894 |
Raj Thermometers |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: B-18,JHILMIL COLONY , EKTA VIHAR, NEW DELHI - 110 095 , Delhi - Delhi , India |
Phone: (91)-(98)-11434306 |
Secure Meters Ltd. |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: P B No 30 E Class, Pratap Nagar Industrial Area , Udaipur - Rajasthan , India |
Phone: 91-294-2123278 |
Fax:
91-294-2492513 |
Invatec Batteris |
Manufacturer and exporter batteries and testing machines, etc.
|
Address: 304 Inderlok Shahzada Bagh Ind Area , Delhi - Delhi , India |
Phone: 0091-11-23643398 |
Fax:
-- |
Toptech Electronics |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: Plot No.34, Shiv Colony, Sector-22, Near Rachna Cinema , Faridabad - Haryana , India |
Phone: 5231071/5445371/5445369 |
Fax:
5231071 |
Megha Pro Tech Systems Private Limited, |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: Plot No. 28, Padmalaya Enclave, Dwarakanagar, Uppal , Seceundrabad - Andhra Pradesh , India |
Phone: +91-040-9246160009 |
Advanced Surveying Instruments (india) Pvt. Ltd. |
We are leading supplier of ASI Soil Testing Instruments, Soil Testing Instruments, Aggregate Testing Instruments, Bitumen Testing Equipments, Cement & Concrete Testing Equipment etc.
|
Address: H-2/313, 3rd Floor, Apra North Ex Plaza, Near SBI Bank Netaji Subhash Place, Pitam Pura, , New Delhi - Delhi , India |
Phone: +91-11-47014143 |
Avon Weighing Systems Limited |
Equipment summary£º
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.
Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.
Main features:
1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission.
2. The whole control system is safe and high reliability.
3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves.
4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves.
5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves.
6. Has limit protection, overload protection, emergency stop and other safe protective functions.
Applicable industry:
It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested..
Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ¡À1% / the value ¡À0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.
|
Address: 15, 2nd Floor, B Wing, Kamal Kunj, Megha Co-op. Hsg. Soc. Ltd., S.V. Road, Irla Bridge, Andheri (West) , Mumbai - Maharashtra , India |
Phone: 26714120 |
Fax:
26717475 |