SG Technologies

SG Technologies

Moisture Meter
Request for Quote
Moisture Meter
This moisture meter is small size, light in weight, easy to carry. Although complex and advanced it is convenient to use and operate. Its ruggedness will allow many years of use if proper operating techniques are followed please read the following instructions carefully and always keep this manual within easy reach.

Specifications : Display :- 4 digits, 10 mm (4inch) LCD (Liquid Crystal Display)
Range :- Moisture Content 0-50 %
Temperature :- 10-65 C
Resolution :- 0.1
Accuracy :- Moisture Content : (0.5% N+1)
Operation Temp :- 0-50C or 32-122F

Quadrant Scale
Request for Quote
Quadrant Scale
The Quadrant Scale is intended for measuring the basis weight very rapidly and accurately in grams per meter2 of paper board & corrugated fiber board or other sheets materials by weighing a small test sample of a certain dimension.
Range :
0-250, 0-500 gm/m2 template 20 25 cm2

Circular Cutter
Request for Quote
Circular Cutter
The instruments Circular Cutters used for cutting out Circular sample of paper, board & similar material. One test specimen in used time by turning the wheel at 90 or one quarter by rotating the wheel up to set time.
50cm2/100 cm2/150 cm2/200 cm2 Circular Cutter (Die & Punch Type)
Size :- 112 8 mm available.

Strip Cutter
Request for Quote
Strip Cutter
Strip Cutter is an excellent and precision cutter for speedy and accurate cutting of specimen 100 cm2 without deformation and damage the punch cutter has a high capacity and several layers of paper profile can be punched out in one operation. Simultaneously sample punch : 100 cm2 and available for other sizes including cutting base.

Sheet Former
Request for Quote
Sheet Former
Sheet Former (K.C.L.) square hand sheet former (K.C.L. model finish type) complete with accessories used for production of laboratory sheets for physical tests. The design of the drainage system provides a uniform flow across the entire wire. Thus permitting an exceptionally uniform sheets used for production of circular sheets. Complete with accessories sheet size 165 mm dia = 214 cm2

Trimmed Size :- 200 cm2 , Standard Stirrer , Couch Roller , Drying Plate & Drying Rings.
As per TAPPI T-205 , scan C-26

Pulp Disintegrator
Request for Quote
Pulp Disintegrator
Pulp Disintegrator extra attachment pre-determination digital revolution counter. Used for standardized Disintegration of pulp to a homogeneous suspension. Pivoted drive unit with stainless steel propeller and shaft. The propeller is driven by electric motor via stepped timing belt which ensures a direct drive with out slippage.
Option Mechanical preset impulse counter on front panel for setting desired number of revolution.
Digital preset pulse counter on front panel for setting desired number of revolution pulp container control.
As per TAPPI T-205 , Scan C-18


Products