San-vij Engineers

San-vij Engineers

San-vij Engineers
-->

Turbine Flow Meter
Request for Quote
Turbine Flow Meter
San-Vij Turbine flow meters are designed for the volumetric measurements of fluids. The meters are rugged, reliable & precise instruments suitable for all Industrial Chemicals, Fuels etc. The basic meter consists of a freely suspended bladed rotor positioned axially in the flow stream with the flowing fluid pushing against the blades. The rotational speed of the turbine is proportional to the velocity of the fluid & hence truly represents the volume of the fluid flowing through meter. The rotation of turbine rotor generates electrical pulses in the pick off attached to flow meter housing. The output pulses are amplified & converted to measure flow rate & Integration.

TURBINE SENSOR with FOUR/SIX DIGIT BATCH CONTROLLER with 1CO Relay output contact offered to transfer PRESET QTY. of liquid from main storage tank with automatic flow shut off.

Specifications
Size

: 10-25 mm NB (threaded end connection)

   40-150 mm NB (C.S. flanged end connection)
Materials : SS 304/316 throughout/PP/PVC
   ROTOR-Teflon/SS/Delrin
   Bearing-Ceramic bush bearing
Accuracy : ±0.5% for liquid.
   (over 1:5 flow Range inclusive of Linearity & repeatability)
Pressure Drop : 0.05 to 0.2 Kg/cm at 100% flow Range.
Pressure : As per flange specifications
Temperature : upto 100 C
Calibrated : Calibrated on water
   


Liquid Flow Range (Turbine)
15 mm NB ~ (10-30)LMP

50 mm NB ~ (125-500) LMP

20 mm NB ~ (20-60)LMP 65 mm NB ~ (200-800) LMP
25 mm NB ~ (30-90)LMP 80 mm NB ~ (300-1200) LMP
40 mm NB ~ (60-240)LMP 100 mm NB ~ (450-2000) LMP
  150 mm NB ~ (1000-5000) LMP


Operating Information
Name of Fluid

: Corrosive/non-corrosive

Viscosity  
Temperature & Pressure  
Nominal Bore of Pipe Line  
Flow Rate : Minimum/Normal/Maximum
Readout Display : Model:FRT/BC4/BC6/BC4T
Power Supply : 230VAC/other

Positive Displacement Flow Meter
Request for Quote
Positive Displacement Flow Meter
San- Vij Positive Displacement Flow meter based on Oscillating Piston or Rotory piston design for accurate & reliable for measurement of Various Industrial Oils, Fuels, Chemicals, Solvents etc.

Working Principles of Positive Display Meter

The Flow meter consiss of piston Oscillating inside a cylindrical housing by a partition. Non contaqct type Solid sate sensor mounted outside the housing is actuated by magnet encapsulated in piston. Output of Solid state sensor is fed to microprocessor based Totalizer or Batch Controller or Flow Transmitter.

 
Moc:

Aluminum /Brass/SS304/SS316

    ( Piston : Derlin Teflon)
Max operating Temp & Pressure : 80˚. C & 10kg/cm2 ( Higher Temp. Possible)
Viscosity : 2000 CST (max)
Pressure Drop : 0.2 to 0.3 kg/cm² (at max. flow Rate)
Accuracy : ± 0.5%
Display Unit : DIN 96X96, panel mounting, supply 230 VAC (Fameproof Enclosure optional)
Application : Fuel consumption, Container filling chemicals Dozing / mixing; Dispensing


Specifications
Size

End connection

Flow Range (at 1 cst )
8mm 1/4"BSP 0.5 - 3.0 LPM
15mm C.S. Flange end 2.0 - 12.0 LPM
25mm C.S. Flange end 6.0 - 36.0 LPM
32mm C.S. Flange end 15 - 100 LPM
40mm C.S. Flange end 30 - 150 LPM
50mm C.S. Flange end 50 - 300 LPM


Display Unit
(microprocessor based DIN 96 x 96. panel mounting)

1. Flow rate Indicator + Six digit Digital Flow totalizer with battery back up. (model: FRT)

2. Four/Six Digit Digital Batch Controller with 1CO Relay Output contact. (model: BC4/BC6)

+ Six Digit totalizer (model: BC4T)

3. Flow Rate + Totalizer + Batcher + 4-20 mA output,

Ultra Sonic Flow Meter
Request for Quote
Ultra Sonic Flow Meter
San-Vij Engineers is also in to manufacturing of ultrasonic flow meter, with reliable quality and providing one of the best services in the market.


Technical fact sheet of Ultrasonic flow meter.

Principle: Transit time measurement.

Sensor: Dump on type , Mounted on pipeline, V path measurement.

Best suitable for 50-1000mm dia pipe.

Time measurement Resolution : 0.1ns

Lcd Display : Flow rate + Total + RS232 o/p

Displacement Unit
Request for Quote
Displacement Unit
(microprocessor based DIN 96 x 96. panel mounting)

1. Flow rate Indicator + Six digit Digital Flow totalizer with battery back up. (model: FRT)

2. Four/Six Digit Digital Batch Controller with 1CO Relay Output contact. (model: BC4/BC6)
+ Six Digit totalizer (model: BC4T)

3. Flow Rate + Totalizer + Batcher + 4-20 mA output,
Optional Features:

RS485 output; 4-20 mA output, Hi/Lo Alarm, Flameproof Enclosure (CMRS approved)


Products