Eagle Industries

Our range of red oxide primer is formulated using top notch quality chemicals. The primer has properties of physical drying and has extreme corrosion resistance. It is also resistant to water and chemicals. The red oxide primer is mainly used in severely corrosive environment.

Specification:

• Sp. Gr. : 1.40 .05 Kg/Ltr
• Flash point : Not below 25°c
• Covering capacity: 10 to 12 sq.mtr. at 35 micron DFT on smooth and non absorbent surface
• Drying time : 2 to 4 hours
• Viscosity : 100±10sec by ford cup No.B-4 at 30°c

Our range of red oxide primer is formulated using top notch quality chemicals. The primer has properties of physical drying and has extreme corrosion resistance. It is also resistant to water and chemicals. The red oxide primer is mainly used in severely corrosive environment.

Specification:

• Sp. Gr. : 1.40 .05 Kg/Ltr
• Flash point : Not below 25°c
• Covering capacity: 10 to 12 sq.mtr. at 35 micron DFT on smooth and non absorbent surface
• Drying time : 2 to 4 hours
• Viscosity : 100±10sec by ford cup No.B-4 at 30°c

We are produce zinc rich primer that are available in over 100 kinds of excellent capability coating for all kinds of projects. The primer is available in two-package system consisting of base and polyamide curing agent with mass ration of components 100:5 respectively. The base is suspension of zinc powder and functional additives in epoxy resin solution in organic solvents mixture. Cure agent is polyamid resin solution in organic solvents. Cure agent is polyamid resin solution in organic solvents.

It is ready to use bituminous base emulsion. It can be use for protective coating on concrete and brick foundation against chloride and sulphate ion which are present in water and soil. It has good corrosion resistance and act as vapor barrier. It can also be applied on retaining walls, damp surface of concrete and asbestos.

Our qualitative assortment of thixotropic bitumen emulsion is widely used all across the globe as ideal waterproofing material. These consist of high quality bitumen and other additives and are suitable for application on retaining walls, damp surface of concrete and asbestos.

Following are some of the unique features of this material:

• Bituminous base emulsion
• Used for protective coating on concrete and brick foundation against chloride and sulphate ion present in water and soil
• Good corrosion resistance
• Acts as vapor barrier

Technical Specifications :

• Color: Brownish black
• Consistency: Smooth, uniform and thixotropic
• Solid content: 60+5%
• Flash Point - Non Inflammable
• pH -Approx.7
• Specific Gravity: 1.15=.05
• Chemical resistance: good
• Insulation properties: good
• Coverage - Approx 30 to 35 sq. ft on smooth and non absorbent surface
• Shelf life -12 month from date of manufacture in packed container
• Packing -50ltrs & 200ltrs

It is single component water base acrylic exterior coating that provides waterproofing as well as heat insulation to the external wall.
It stops heat penetration and keep the surface cool by reflecting more than 90% heat of sun from the surface.
It provides durability and long lasting finish to the external surface. It protect external surface against carbonation and similar environmental attack and also prevent formation
Of fungi & algae.

Technical Data:
1. Colour :- white & shade as per requirment
2. Finish:- smooth & semiglossy (egg shell)
3. Consistency:- smooth & thixotropic
4. Drying time:- surfac dry 1 to 2 hours in normal condition
5. Llash point:- non inflammable
6. Coverag:- 30 to 35 squir feet /kg /two coats when applied by brush
7. Shelf life:- not more then one year when packed in tight sealed container
8. Packing available:-1 kg , 5 kg, 10 kg, 25 kg